Product Overview
The T3 Transfer Pump combines Graco's proven Merkur'
air-motor and popular T2 lower. The T3 is a 3:1 ratio pump - using less air pressure to provide the same fluid pressure required.
The T3 pump is rated for a continuous output of 17 lpm (4.5 gpm),
allowing enough flow to easily keep up with Graco's biggest proportioner,
the Reactor H-50. As the T3 is rated for a max. inlet pressure of
6.8 bar (100 psi, 0.68 MPa), an air regulator is included with every
pump.
- Easier to maneuver - The overall height of the T3 is 9.4 cm (3.7 inches) less above the drum than the T2, making it easier to remove from the drum inside a spray rig.
- Studies show the T3 Transfer Pump is approx. 3x quieter than the T2 Transfer Pump.
- Less maintenance - the Merkur air motor is based on air pilot valve technology. The air motor switching is completely pneumatic. This differs from T1 and T2 Transfer Pumps, which use a mechanical reversing mechanism in the air motor
Ratio- 3:1
Max output- 4.5gpm
Max input air pressure- 100psi
Max output- 315psi
Weight- 22lbs
Height- 50.3in
